Teaching Diffusion with Smell and Dye: A Two-Period Senior 2 Lesson Plan (Rwanda)

Image
  Illustration: Students observing diffusion with dye in cold and warm water. By Uwimana Protogene, Biology teacher for O’Level students in Rwanda since 2009. Students can say “diffusion is the movement of particles from high to low concentration” and still not understand it. They need to see it and feel it. This lesson uses two simple activities, a smell travelling across the classroom and a drop of dye spreading in water, so students observe diffusion before they define it. It needs almost no money, works with 60 or more students, and fits the CBC approach because students predict, test and explain. It is the lesson before my osmosis lesson, Teaching Osmosis with Potato Strips . Lesson at a glance Class: Senior 2 Biology, Unit 3: Passive movement of substances across a cell membrane (diffusion) Time: about 80 minutes, two periods of 40 minutes Group size: 6 to 8 students per group Learning goal: Students can define diffusion, explain it using particles, and name factors that ...

Teaching Photosynthesis with Local Materials: 7 Low-Cost Activities (Rwanda)

Students investigating photosynthesis with a potted plant and a covered leaf
Illustration: Students investigating photosynthesis with a potted plant and a covered leaf.


 By Uwimana Protogene, Biology teacher for O’Level students in Rwanda since 2009.

Photosynthesis is one of the most important topics in Biology, and one of the hardest to see. Students can’t watch glucose being made, so many memorise the equation without understanding it. They also carry ideas like “plants get their food from the soil.” 

This post shares seven activities for teaching photosynthesis in O’Level Biology in Rwanda, using locally available materials. They work with large classes and support the CBC approach, because students investigate, observe, and explain. Not every school has iodine, spirit, or glassware, so each activity includes a simpler option where possible.

Materials at a glance: potted or garden plants, black paper or foil, beans, a cardboard box, a clear jar or bottle, baking soda, filter paper or coffee filter, iodine solution (or tincture of iodine from a pharmacy), and methylated spirit for the teacher demonstration.

Safety first:

  • Spirit (alcohol) is flammable. Never heat it over a flame. Use a hot water bath away from any fire, and keep this step as a teacher demonstration.
  • Iodine stains and is poisonous if swallowed. Students must not taste or drink anything in the experiments, and should wash hands afterwards.
  • Test each activity yourself first.

1. Light is needed: cover part of a leaf

What to do: Choose a healthy potted plant. First, destarch it by leaving it in a dark cupboard or box for 24 to 48 hours. Then cover part of one leaf on both sides with black paper or foil (fix it with a paper clip) and put the plant in bright sunlight for several hours. Remove the leaf and test it for starch (see activity 2).

What students should see: The part that was covered does not turn blue-black. The part that received light does. For a fuller class version with a student sheet, see Practical Biology’s Identifying the conditions needed for photosynthesis.

Why it happens: Photosynthesis needs light, and starch is a store of the glucose the plant makes. No light means no photosynthesis in that part of the leaf, so no starch is stored there.

Fair test: Ask students: why do we destarch the plant first, and why is a covered part on the same leaf useful? The student's answers should include that to destarch the plant first aim to remove all starch to ensure that after photosynthesis there is a new sugar formed and the leaf is covered to investigate that light is necessary photosynthesis.

2. The starch test on a leaf

What to do (teacher demonstration or small groups with supervision):

  1. Dip the leaf in hot (not boiling) water for about a minute to soften it.
  2. Place it in a container with methylated spirit and stand that container in a hot water bath (never over a flame) until the green colour is removed.
  3. Rinse the leaf in water, spread it on a plate, and add a few drops of iodine.

What students should see: Starch turns iodine from brown to blue-black. Before you run the test on leaves, try it on a piece of potato or cassava to show students what a positive result looks like.

Why test for starch and not glucose? In the leaf, extra glucose is quickly turned into starch, so a positive starch test shows that photosynthesis has happened. See Practical Biology’s Testing leaves for starch: the technique.

If you have no iodine or spirit: Run the starch test on food (potato, cassava, maize flour) instead, and discuss the leaf results using a drawing or a photo. Be honest with students that this replaces the leaf test, but not the idea behind it.

3. Chlorophyll is needed: use a variegated leaf

What to do: Choose a leaf with green and white or yellow patches. Many ornamental plants in school gardens have them, such as croton or coleus. Make sure the plant has been in sunlight, then test the leaf for starch as in activity 2. Before you start, draw the pattern of the leaf (or take a photo) so students can compare.

What students should see: Blue-black appears only where the leaf was green. The white or yellow parts stay brown.

Why it happens: Chlorophyll absorbs the light energy used for photosynthesis, so only the green parts make starch.

Tip: A drawing of the leaf before and after is a good chance to practise the rules in my post on teaching Biology diagrams.

4. Oxygen from a water plant

What to do: Put a handful of a submerged water plant (such as pond weed) in a clear jar of water. Add a small pinch of baking soda to supply carbon dioxide. Place one jar in bright sunlight and another in shade (or in a dark box). After 10 to 15 minutes, count the bubbles rising from the cut stems in one minute.

What students should see: More bubbles in bright light than in shade or darkness.

Why it happens: The bubbles are mostly oxygen released during photosynthesis. More light usually means faster photosynthesis, so more bubbles.

Be honest with students: Not every water plant releases clear bubbles, so test yours first. A bubble count is only a rough measure, and it works best if the plant has been in light for several minutes. If you cannot find a water plant, show a photo or a short video instead. 

Practical Biology describes the same bubble-counting method using Elodea or Cabomba: Investigating factors affecting the rate of photosynthesis.

5. Separate leaf pigments by chromatography

What to do: Crush a few green leaves with a little spirit in a small container (a coin can help) to make a green solution. Draw a pencil line near the bottom of a strip of filter paper or coffee filter and put a thick dot of the solution on it. Hang the strip so its bottom edge just touches a shallow layer of spirit in a jar, below the dot. Wait until the liquid has climbed most of the way up.

What students should see: Bands of colour, often green and yellow-orange shades.

Why it happens: Leaves contain several pigments, not just chlorophyll, and they travel up the paper at different speeds. Results vary, so test with your own leaves and paper. We observed green and yellow-orange bands moving up the paper. The green band was likely chlorophyll, while the yellow-orange bands were other leaf pigments.

Safety: Keep spirit away from flames, and do the experiment in a ventilated room.

6. Do plants need light to grow? Two bean seedlings

What to do: Plant 4 to 6 beans in each of two containers of soil. Water both equally. Put one in a sunny place and the other inside a cardboard box that lets in no light (open it briefly only to water). Compare after 7 to 10 days.

What students should see: The seedlings kept in the dark are usually pale yellow, tall, and thin. The ones in light are green and sturdier.

Why it happens: Without light, seedlings cannot make chlorophyll or carry out photosynthesis, and they use up their stored food while stretching to find light.

Why it matters: This links to the misconception that plants get their food from the soil. Both groups had the same soil and water, but only one had light. See 7 Common Biology Misconceptions.

7. Act out photosynthesis: the “leaf factory”

What to do: Label cards: carbon dioxide, water, light energy, chlorophyll, glucose, oxygen. Choose students to be the cards and stand in a “leaf” marked on the floor with string. Some students enter through “stomata” (carbon dioxide), some through “roots and xylem” (water), and the “sun” student brings light energy. When all three come together at chlorophyll, the group “makes” glucose and oxygen, and students swap cards. Then write the word equation on the board: carbon dioxide + water → glucose + oxygen, with light energy and chlorophyll written above the arrow.

What students should be able to do: Say what goes in, what comes out, and where each substance comes from. For the water pathway, link to my post on Transport in Plants.

Tip for large classes: Run it in groups of 6 to 8, following the group-work ideas in Teaching 60+ Students with One Textbook.

Exam skills for photosynthesis

  • Use the right words. Write “carbon dioxide and water,” not “air and soil.”
  • Use “because.” For “explain” questions, give the result and the reason: “The covered part had no starch because it had no light, so no photosynthesis happened.” See Biology marking scheme tips.
  • Know the controls. Be ready to explain why destarching and a covered part on the same leaf make the experiment a fair test.

How this fits CBC

These activities help students build critical thinking, research, communication, and cooperation, because they plan fair tests, record results, and explain what they see. Quick checks, such as asking each group to predict a result before testing, also support continuous assessment. More in my posts under CBC Rwanda.

Final thoughts

You don’t need a full laboratory to teach photosynthesis well. Pick one or two activities, such as the covered leaf and the bean seedlings, and let students predict, test, and explain. If your school has no microscope, see my post on teaching Biology without a microscope for more low-cost ideas.

Call to action: Which photosynthesis activity will you try first, and what did your students observe? Share it in the comments.


Contact me on WhatsApp (https://wa.me/250785811573) | Facebook (https://web.facebook.com/proto.uwimana/) | Instagram (https://www.instagram.com/protouwimana/) | X (https://x.com/Uwimanaprotoge2)


References and further reading

  1. Rwanda Education Board (REB), curriculum and teaching resources: reb.rw
  2. Practical Biology, Testing leaves for starch: the technique: practicalbiology.org
  3. Practical Biology, Identifying the conditions needed for photosynthesis: practicalbiology.org
  4. Practical Biology, Investigating factors affecting the rate of photosynthesis: practicalbiology.org 

Comments

Popular posts from this blog

Post-Exam Classroom Activities That Build Skills Without Stress (Rwanda 2025 Guide)

Simple ICT Tools Teachers Can Use in Low-Resource Schools

Practical Teaching Strategies in the AI Era: A Guide for Rwandan Teachers